How to fix the lighting on my Prophete CITY?
If your Prophete Bicycle's lighting isn't working, start by ensuring the lamps are switched on. If that doesn't solve the issue, the cable might be defective and need replacement. Also, check the plug contacts to ensure they are properly connected. Finally, the lamp itself may be defective, requiring replacement of the lamp or LED headlight.
Why is my Prophete CITY making unusual noises?
If you experience unusual noise when cycling your Prophete Bicycle, it might be due to several reasons. First, check if the stem/handlebar screws are not tightened and retighten them. Another cause might be that the chain is not lubricated sufficiently, so lubricate the chain. If the chain is too tight, retension it. Finally, ensure the foot pedal attachment is tightened.
What to do if Prophete CITY has insufficient brake output?
If you are experiencing insufficient brake output on your Prophete Bicycle, it could be due to worn brake linings that need replacement. Alternatively, the brake might be set incorrectly and require adjustment. In case of permanent stress, such as long downhill rides, use all brakes alternatingly to avoid overheating.
Why does my Prophete CITY run 'stiff'?
If your Prophete Bicycle runs 'stiff', it could be due to several reasons. The air pressure might be too low, so increase the air pressure. Another possibility is that the brake drags, requiring adjustment. Lastly, check if a too-high gear is engaged and shift to a lower gear.
What to do if Prophete CITY Bicycle has no spring effect?
If you notice no or insufficient spring effect on your Prophete Bicycle, it's possible that the spring element is too tense. To resolve this, adjust the suspension to a softer setting.
Defines the suitable applications and environments for the bicycle.
Safety warnings and adjustment procedures for V-brake systems.
Procedure for aligning and adjusting brake pads to the rim.
Adjusting brake lever pressure to account for pad wear.
Procedure for replacing brake pads on hydraulic rim brakes.
Information on setting disc brake systems.
Steps for replacing brake pads on hydraulic disc brakes.
Guidance on spoke tension, maintenance, and repair.
Safety checks and installation procedures for the front wheel.
Explanation of how to operate and maintain hub gear systems.
Guidelines for safely installing and using child seats on the bicycle.
Specific warranty conditions for frame and fork breakage.
General| Type | City Bike |
|---|---|
| Gears | 7 |
| Saddle | Comfort Saddle |
| Kickstand | Yes |
| Wheel Size | 28 inches |
| Lighting | Hub Dynamo, LED Headlights and Taillight |
To Next Page
