Propur Scout - Installation

NEW On/Off Spigot handle
On - 6 o’clock position
Off - 3 o’clock position
One white washer
goes on the out-
side and one on
the inside of the
container.
Stainless steel
washer on
the outside
Container
NEW “wide mouth”
DIAGRAM A — SPIGOT INSTALLATION
Stainless steel
washer on
the inside
Container
Plastic nut
Rubber washer
Rubber washer
SIGHT GLASS SPIGOT INSTALLATION
Instructions
1) Remove plastic nut
from spigot.
2) Remove one rubber
washer from spigot.
3) Place threaded stem
through spigot hole in
the bottom container.
4) Reinstall rubber washer.
5) Reinstall plastic nut.
PLASTIC SPIGOT INSTALLATION
Instructions
1) Remove plastic nut
from spigot.
2) Remove one rubber
washer from spigot.
3) Place threaded stem
through spigot hole in
the bottom container.
4) Reinstall rubber washer.
5) Reinstall plastic nut.
Rubber washer Rubber washer
Container
Plastic nut
Nut
7