17
The driver should be aware:
1. Be very careful when changing direction on slopes.
2. Stop the blade when crossing terrain other than lawns and when the riding
mower is transported to and from the work area.
3. Disengage the blade and drive control before starting the machine.
4. Hands and feet must be kept away from the blade. Always keep away from the
grass unloading opening
5. Watch out for traffic when crossing or near roadways.
6. Never direct discharge of material toward bystanders nor allow anyone near the
machine while in operation.
Before carrying out any inspection, cleaning, and servicing
operations on the machine, stop the machine, take out the ignition Key and follow the
instructions in the operator’s manual.
The blades are sharp, risk of a serious injury!
Before carrying out any inspection, cleaning, and repair operations on the cutting parts,
stop the machine and take out the ignition Key.
The blades are sharp, risk of a serious injury!
1. Wait for the blade and all the moving parts to come to a halt before touching
them. The blade will continue turning for some time after switching off the
machine or disabling the blade control.
2. Disengage the blade during transport and every time it is not used.
GENERAL SERVICE
1. Contact PRORUN Customer Service with questions or issues with this machine.
This will ensure that the safety of the riding mower is maintained.
2. Recharge only with the charger specified by the manufacturer. A charger that is
suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
3. Do not use the charger in the rain.
4. Replace batteries if the battery capacity drops below 50% of the initial capacity.
5. The use of old or faulty batteries could cause a system fault that results in loss of
power.
6. Turn off and remove the Key before servicing, cleaning, or removing materials
from the mower.
To Next Page
Loading...
