28
PARK BRAKE HANDLE (Part 4)
The Park Brake Handle is located at the
front of the console under the steering
wheel. It is used to engage the Parking
Brake when the mower is at rest. Refer to
the operation section of this manual for
detailed instructions.
The Park Break Handle must be set whenever the operator leaves the seat.
Never leave a powered machine running and unattended! Always
disengage the Blade Start / Stop Knob, stop the mower, set the Parking Brake, and
remove the Key to prevent injuries or damage.
BRAKE PEDAL (Part 5)
The Brake Pedal is located on the left
front side of the steering column. The
Brake Pedal can be used for sudden
stops or when setting the parking brake
FORWARD DRIVE PEDAL (Part 6)
The Forward Drive Pedal is located on
the front right side of the steering
column. Press the Forward Drive Pedal
forward to travel forward. The ground
speed is controlled with this pedal. The
further forward the pedal is moved the
faster the mower will travel. The pedal
and speed will return to their original
position when released.
To Next Page
Loading...
