EasyManua.ls Logo

ProScan PDVD9806 - Page 19

ProScan PDVD9806
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
In Video Setup Page:
1. If "Picture" is selected, using the Direction and ENTER Buttons to set the panel quality such
Sharpness;
Brightness; Contrast; Hue or Saturation as desired.
Sharpness;
Brightness;
Contrast; Gamma; Hue or Saturation as desired.
In Preference Setup Page:
DVD).
~ Press the
~ Press the or
~ Rate levels:
2 (G): All ages
6 (R): Under 17 years old, Parental Guidance strongly
8 (Adult): Adult only
PAL, AUTO or NTSC.
(
Function depend the recording of
menu will appear.
~ Enter the six digit old password. The Colum of New Password will be
highlighted.
~ Enter the new six digit password. The Colum of Confirm Pwd will be
highlighted.
to set it On (activate the
rating level setting) or
New password setting menu
will appear.
the ENTER Button to save
the setting and exit.
setting to default setting or
rection and ENTER Buttons to set to1. If TV Type is selected, using the Di
of the available language.
2. If Audio, Subtitle or Disc Menu is selected, using the Direction and ENTER buttons to the priority
3. If Parental is selected, using the Direction and ENTER Buttons to set the rating level as desire as follow:
~ Enter the six digit password ( default password is 136900 ) by pressing the Numeric Buttons.
~ Press the ENTER Button to save the settings and exit.
1 (Kid Saf ): Kid safe
3 (Pg): Parental Guidance
4 (Pg 13): Parental Guidance less than 13 years old
5 (Pgr): Under 17 years old, Parental Guidance suggested
7 (Nc 17): 17 years old or above
Off
(Password is needed).
4. If Password is selected, press the ENTER Button to enter, the subsetting
~ If Password Mode is selected, using the Direction and ENTER buttons
~ If Password is selected, press the ENTER Button twice to enter. The
~ Enter the new password again. OK Button
will be highlighted.
Press
on the screen
5. If Default is selected, using the Direction and ENTER Buttons to reset all
press the SETUP Button to exit without changes.
Button to enter, the rating level list will appear.
Button to select the desired level.
~ Press the ENTER Button to enter, password enter window will pop up.
2. If Picture Quality is selected,
using the Direction and ENTER Buttons to set the
of the Video input signal
like
SYSTEM SETUP
(NOTE: The TV system in USA, Canada and Mexico is NTSC.)

Related product manuals