ProScan PLDEDV3293-UK - Page 36

31
Default: resets all settings (except
password and parental lock status) for this
DVD player back to the manufacturers
original settings, press ENTER to perform
the reset,
Note;
Some functions may not be available
depending no the type of disc.
ANALOG AUDIO SETUP PAGE
1.Press the DVD-SETUP button,the
Analog
Audio Setup Page, Preference
Page will be displayed in turn.
2.press c or d to select,the item,then press to enter the submenu.
3.Press c or d to select then press PLAY/PAUSE or ENTER to comfirm.
4.Press DVDSETUP repeatedly to exit the set-up menus.
Note1: If the DVD have the USB and CARD terminal, you can use the function with these
operation as below. When the current source is DVD, press “USB/CR” button to display the
threshold. Press “c/d” button to select “USB” or “CARD” and press “ENTER” button to confirm.
Press “c/d” button to select the item which you want to play and press the “ENTER” button to
play. Press “e” button to return back the previous catalogue when you have enter one
subdirectories at least. Press “
” button to start playing or pause playing. Press “ ” button to
stop. Press “
” to play backward. Press “ ” button to play forward. Press “ ” button to
skip the previous chapter. Press “
” button to skip the next chapter.
Note2:The DVD's work temperature is 0ć to 40ć.