Why can't I change the time manually on my ProScan LCD TV?
Your ProScan LCD TV automatically syncs the time according to your local TV channel. This function only works when the TV’s tuner is connected to an ANTENNA.
How to fix no picture on my ProScan LCD TV?
If your ProScan LCD TV shows no picture, ensure the power cord is correctly connected and the power is turned on. Also, verify that the video cable is properly connected. Select the correct input signal source using the source button, ensuring it matches your cable connection.
Why does my ProScan LCD TV have picture but no audio?
If your ProScan LCD TV has picture but no audio, first ensure that the audio cable is correctly connected. Next, readjust the volume using the remote control. Also, make sure that the TV’s tuner signal is not lower than 65 %.
Why does my ProScan LCD TV have audio but no picture?
If your ProScan LCD TV has audio but no picture, ensure that both your video and audio cables are connected properly. Also, the TV’s tuner signal must not be lower than 65 %.
How to fix abnormal colors on ProScan LCD TV?
To correct abnormal colors on your ProScan LCD TV, ensure that the colors on the cables match the ports on the back of the television. For example, connect the red cable to the red colored port.
Why is the picture quality horrible on my ProScan LCD TV?
For the best image quality on your ProScan LCD TV, view HD widescreen programs whenever possible. If HD content isn't available, view "Standard Definition" from a digital source. Standard, analog TV will always be noticeably inferior to HD because your TV has video that is many times better than old TVs, revealing interference and deficiencies.
Why is the picture distorted or sound abnormal on my ProScan LCD TV?
Distorted picture or abnormal sound on your ProScan LCD TV might be due to interference from large electrical appliances, cars, motorcycles, or fluorescent lights. If the TV is close to the wall, try moving it to another room to see if the problem persists.
Why is there noise or trash pixels on the screen of my ProScan LCD TV?
Noise or trash pixels on your ProScan LCD TV screen occur when your TV’s resolution is higher than the digital channel’s broadcast resolution. The signal is then up-converted to match your TV’s resolution.
How to get 1920x1080 resolution on ProScan LCD TV using PC VGA?
To achieve 1920x1080 resolution on your ProScan LCD TV via PC VGA, first ensure that the TV is recognized as a plug and play monitor. Also, try updating your video card's drivers. If the issue persists, you may need to upgrade your video card.
How to make the picture cover the entire screen on my ProScan LCD TV?
If the picture on your ProScan LCD TV doesn't cover the entire screen, and you're using HDMI or a digital TV channel, use the ASPECT button to switch to the 16:9 format. If you're using VGA, use the AUTO ADJUST function. For regular analog TV, AV, or component in 480i resolution, use the ASPECT button to switch to 16:9.
General| Screen Type | led |
|---|---|
| Wall Mount | 100mm x 100mm |
| Features | tv/dvd combo |
| Tuner | digital |
| Screen Size | 24 inches |
| Refresh Rate | 60hz |
| Brightness | 250 candela per square meter |
| HDR | no |
| Built-In Speakers | yes |
| Speakers Output | 6 watts |
| HDMI ARC Ports | no |
| USB Ports | 1 |
| USB 2.0 Ports | 0 |
| USB 3.0 Ports | 0 |
| Ethernet | no |
| RF Antenna | yes |
| Network | none |
| Headphones Output | yes |
| Digital Optical Audio Outputs | 1 |
| Analog Audio Outputs | 1 |
| Component Video Inputs | 1 |
| Composite Video Inputs | 1 |
| DVI | 0 |
| VGA Ports | 0 |
| Remote Control | standard |
| 3D | no |
| Power Consumption | 37 kilowatt hours |
| Width with Stand | 21.9 inches |
| Depth without Stand | 6.5 inches |
| Height without Stand | 13.1 inches |
| Net Weight without Stand | 8 pounds |
To Next Page
