What does it mean if my ProScan LCD TV HDCP video says no HDCP support?
If your ProScan LCD TV's HDCP video displays 'no HDCP support', reboot your HDCP video device by turning it off and unplugging the power cord. Wait up to 8 minutes before plugging it back in to see if it resolves the issue.
Why does my ProScan LCD TV HDCP video have no audio?
If your HDCP video on your ProScan LCD TV has no audio, ensure a 3.5 mm mini-jack cable is connected from your HDCP video device’s sound output to the TV’s VGA STEREO INPUT. If your HDCP video device uses RCA AUDIO jacks, you’ll need an RCA audio converted into a 3.5 mm mini-jack cable.
What to do if ProScan LCD TV remote control does not work?
If your ProScan LCD TV remote control isn't working, try these steps: 1. Turn off the TV and unplug it. 2. Remove the batteries from the remote for 30 minutes. 3. Press the remote buttons and the power button randomly for 2 seconds. 4. Reinstall the batteries and test the remote. Also, ensure there's a clear line of sight between the remote's sensor and the TV's remote sensor, which is near the power indicator light.
Why does switching channels change the volume on my ProScan LCD TV?
Switching channels or sources can change the volume on your ProScan LCD TV because different channels and inputs might have inherently loud signals. To combat this, ensure the AUTO VOLUME LEVEL function is turned on in your TV settings.
How to make the picture cover the entire screen on my ProScan LCD TV?
If the picture on your ProScan LCD TV doesn't cover the entire screen, and you're using HDMI or a digital TV channel, use the ASPECT button to switch to the 16:9 format. If you're using VGA, use the AUTO ADJUST function. For regular analog TV, AV, or component in 480i resolution, use the ASPECT button to switch to 16:9.
How to brighten a too dark picture on ProScan LCD TV?
To brighten a picture that is too dark on your ProScan LCD TV, adjust the contrast, brightness, and lamp settings from the OSD Menu.
Why can't my ProScan LCD TV receive enough channels through the ATSC/NTSC tuner?
If your ProScan LCD TV isn't receiving enough channels, it may be due to a weak tuner signal. Change the direction of your antenna and rescan for channels. If you use cable, contact your cable provider to check your local cable's signal strength.
What to do if ProScan LCD TV shows weak signal or no program symbol?
If your ProScan LCD TV displays a weak signal or no program symbol, try changing the direction of your antenna and then rescan the channels. If you have cable, contact your cable company to inquire about the signal strength of your local cable.
How do I fix no color on my ProScan LCD TV?
To fix the 'no color' issue on your ProScan LCD TV, adjust your picture settings to ensure the saturation and RGB settings are not turned all the way down. Also, check your signal; the TV’s tuner signal must not be lower than 65 %.
How to fix abnormal colors on ProScan LCD TV?
To correct abnormal colors on your ProScan LCD TV, ensure that the colors on the cables match the ports on the back of the television. For example, connect the red cable to the red colored port.
General| Screen Type | led |
|---|---|
| Wall Mount | 100mm x 100mm |
| Features | tv/dvd combo |
| Tuner | digital |
| Screen Size | 24 inches |
| Refresh Rate | 60hz |
| Brightness | 250 candela per square meter |
| HDR | no |
| Built-In Speakers | yes |
| Speakers Output | 6 watts |
| HDMI ARC Ports | no |
| USB Ports | 1 |
| USB 2.0 Ports | 0 |
| USB 3.0 Ports | 0 |
| Ethernet | no |
| RF Antenna | yes |
| Network | none |
| Headphones Output | yes |
| Digital Optical Audio Outputs | 1 |
| Analog Audio Outputs | 1 |
| Component Video Inputs | 1 |
| Composite Video Inputs | 1 |
| DVI | 0 |
| VGA Ports | 0 |
| Remote Control | standard |
| 3D | no |
| Power Consumption | 37 kilowatt hours |
| Width with Stand | 21.9 inches |
| Depth without Stand | 6.5 inches |
| Height without Stand | 13.1 inches |
| Net Weight without Stand | 8 pounds |
To Next Page
