ProScan PLEDV2488A User Manual

- 4 -
IMPORTANT INFORMATION
Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna or cable system is to be connected to the TV, make sure that the
antenna or cable system is electrically grounded to provide some protection against voltage
surges and static charges. Article 810 of the National Electrical Code, ANSI/NFPSA 70,
provides information with regard to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors,
location of antenna discharge unit, connection to grounding electrodes, and requirements of
the grounding electrode.
Lightning Protection
For added protection of the TV during a lightning storm or when it is left unattended or unused
for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or
cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall into such
power lines or circuits.

ProScan PLEDV2488A Specifications

General

Screen Type	led
Wall Mount	100mm x 100mm
Features	tv/dvd combo
Tuner	digital
Screen Size	24 inches
Refresh Rate	60hz
Brightness	250 candela per square meter
HDR	no
Built-In Speakers	yes
Speakers Output	6 watts
HDMI ARC Ports	no
USB Ports	1
USB 2.0 Ports	0
USB 3.0 Ports	0
Ethernet	no
RF Antenna	yes
Network	none
Headphones Output	yes
Digital Optical Audio Outputs	1
Analog Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
DVI	0
VGA Ports	0
Remote Control	standard
3D	no
Power Consumption	37 kilowatt hours
Width with Stand	21.9 inches
Depth without Stand	6.5 inches
Height without Stand	13.1 inches
Net Weight without Stand	8 pounds