ProScan PSB3713-B User Manual

AUX IN
- AUX IN source may include:
·Personal audio players
·Personal computers or laptops
- AUX IN connection:
1. Connect a stereo 3.5mm jack cable (supplied) between the headphone or LINE/Audio output of
Set your personal audio player/computer to play.
NOTE: If there is no sound or if the volume is not loud enough, you may increase the setting on
the source.
- During playback
·Press MUTE button to turn off the sound. Press again to resume the sound.
·Press VOLUME+/- buttons to adjust the volume level.
·Press BASS+/- buttons to adjust bass level.
·Press TREBLE+/-buttons to adjust treble level.
·Press EQ button to switch between POP/JAZZ/CLASSIC/ROCK/NORMAL.
7
MODE2. Power on the unit and press button repeatedly until "AUX1" appears on the display.
the personal audio player and the jack on the front of the unit.AUX IN1
POWER
RESET
Computer
MP3
Supplied audio
connection cable
To AUX IN 1 Jack
Connect to the output
socket of external
audio devices (MP3,
Computer,ext.)
on the unit
TUN- TUN+
VOL- VO L+
AUX IN 1
MODE

ProScan PSB3713-B Specifications

General

Brand	ProScan
Model	PSB3713-B
Category	Speaker System
Language	English