To Next Page
R
Randy JeffersonSep 4, 2025
What to do if Proscenic Vacuum Cleaner is stuck?
- KKevin WellsSep 4, 2025
If your Proscenic Vacuum Cleaner is displaying this error, the robot may be stuck or trapped. Clear any obstacles around it.
What to do if Proscenic Vacuum Cleaner is stuck?
If your Proscenic Vacuum Cleaner is displaying this error, the robot may be stuck or trapped. Clear any obstacles around it.
How to fix abnormal behavior of Proscenic Vacuum Cleaner?
If your Proscenic Vacuum Cleaner is behaving abnormally, reboot it after shutting it down.
What to do if Proscenic Vacuum Cleaner won't return to base after being moved?
If your Proscenic Vacuum Cleaner cannot return to the charging base after partial cleaning or being moved, manually place the robot in the charging stand.
What to do if Proscenic Vacuum Cleaner asks to put back the dust box and filter?
If your Proscenic Vacuum Cleaner is displaying this message, try replacing the filter and ensure that the filter and dust box are in place. If the issue persists, try replacing the filter again.
What to do if Proscenic Vacuum Cleaner needs to be on horizontal ground?
If your Proscenic Vacuum Cleaner displays this message, it means the robot is tilted at startup. Place the robot on horizontal ground to restart.
What to do if Proscenic Vacuum Cleaner says to place it on the ground?
If your Proscenic Vacuum Cleaner displays this message, it means the wheels are suspended. Place the robot on the ground to start.
How to fix Proscenic Vacuum Cleaner collision bumper?
If your Proscenic Vacuum Cleaner's collision bumper is abnormal, the collision bumper may be stuck. Tap it several times to remove any foreign objects. If there are no foreign objects, move the robot to another position to start.
What to do if Proscenic Vacuum Cleaner lidar cover got stuck?
If your Proscenic Vacuum Cleaner displays this message, clear any foreign objects around the lidar, or move the robot to a new position to restart.
How to fix Proscenic Vacuum Cleaner fall-arrest sensor error?
If your Proscenic Vacuum Cleaner is showing this message, the fall-arrest sensors may be dirty. Wipe them with a soft rag.
How to fix Proscenic Vacuum Cleaner unable to connect to Wi-Fi?
If your Proscenic Vacuum Cleaner can't connect to Wi-Fi, ensure the robot is within good Wi-Fi signal coverage. If the signal is good, reset the Wi-Fi connection. As a last resort, download the latest version of the application and try connecting again.
Identifies robot buttons, status lights, and main body parts.
Steps to connect the robot to a Wi-Fi network via the app.
Details components like the mopping module, charging base, and remote control.
Correctly positioning the dock and robot's automatic recharging process.
Guide to app download, initial setup, and Wi-Fi resetting.
Guidance on attaching the mopping module to the robot.
Explains different cleaning cycles: spot, schedule, and edge cleaning.
Details area cleaning features and how to adjust suction power.
Covers managing robot recharge and sleep mode operations.
Procedures for cleaning key maintenance parts like brushes, bin, and sensors.
Details the physical and electrical specifications of the robot and its base.
Addresses common issues with voice prompts, indicators, and operational errors.
Information on laser safety standards and FCC regulatory compliance.
General| App Control | Yes |
|---|---|
| Weight | 3.2 kg |
| Noise Level | ≤65dB |
| Navigation Type | LDS Laser Navigation |
| Cleaning Modes | Auto, Edge, Spot, Single Room |
| Features | Virtual Boundaries |
