Package Includes:
• Base Plate Mounting System
• Screws and Anchors
• 2 AA Batteries
• Thermostat Literature
Heat On
Menu
Fan Auto
Non-programmable Thermostat
PSTSN11AWH, PSTSN21AWH
User Guide
For assistance with this product, please contact PROSELECT® via
owat@ferguson.com or 1-800-221-3379.
Customer assistance
Thermostat controls
• System status information
Cool On
Heat On
Em Heat On
• Indoor
temperature
setpoint
Press + or – to
change temperature
setting
• Actual indoor
temperature
• Fan
Select Fan mode
Auto/On
• Mode
Select system mode
Heat/Off/Cool/Auto/
EM Heat (emergency
heat)
• Menu
Press to enter the system
mode or fan settings
• Temperature/
Navigation buttons
Press to increase or decrease
the temperature setpoint or
to cycle through the system
mode or fan settings
The screen will wake up by pressing any of the five buttons. If powered by the C wire, the screen stays lit for 45
seconds after you complete changes. If powered by battery only, the screen stays lit for 8 seconds. Depending on
how your thermostat was installed, the screen light may always be on.
Read before installing
Heat On
Menu
Fan Auto
M39422
Mode
Fan
Auto
To Next Page
Need help?
General
