Package Includes:

• Base Plate Mounting System

• Screws and Anchors

• 2 AA Batteries

• Thermostat Literature

Heat On

Fan Auto

M39418

Non-programmable Thermostat

PSTSN11AWH, PSTSN21AWH

User Guide

For assistance with this product, please contact PROSELECT® via

owat@ferguson.com or 1-800-221-3379.

Customer assistance

Thermostat controls

• System status information

Cool On

Heat On

Em Heat On

• Indoor

temperature

setpoint

Press + or – to

change temperature

setting

• Actual indoor

temperature

• Fan

Select Fan mode

Auto/On

• Mode

Select system mode

Heat/Off/Cool/Auto/

EM Heat (emergency

heat)

• Menu

Press to enter the system

mode or fan settings

• Temperature/

Navigation buttons

Press to increase or decrease

the temperature setpoint or

to cycle through the system

mode or fan settings

The screen will wake up by pressing any of the five buttons. If powered by the C wire, the screen stays lit for 45

seconds after you complete changes. If powered by battery only, the screen stays lit for 8 seconds. Depending on

how your thermostat was installed, the screen light may always be on.

Read before installing

Heat On

Fan Auto

M39422

Mode

Fan

Auto

ProSelect PSTSN11AWH - Installation Instructions Manual

Other manuals for ProSelect PSTSN11AWH

Related product manuals