Proshade 1500093 - Assembling the Base; Umbrella Cover

ASSEMBLING THE BASE
1
14
12
2
3
SAND
4
WATER

Remove base cover.

Insert standing tube.

Fill base with sand.
It is recommended to
use 90 kg / 200 lb of sand.
 Add water to wet the sand.
UMBRELLA COVER
Umbrella Cover
Support Rod
Umbrella Cover
Caution:
Use umbrella cover only when umbrella is completely dry.
Umbrella should be closed or stored indoors during windy conditions.
Do not use during severe weather conditions.


3 16