To Next Page
L
Lauren OdonnellJul 27, 2025
What to do if my ProsKit mt-2017 does not work?
- DdarrensanchezJul 27, 2025
If your ProsKit Multimeter isn't working, the batteries may be exhausted. Check the condition of the batteries and the 0.5A fuse.
What to do if my ProsKit mt-2017 does not work?
If your ProsKit Multimeter isn't working, the batteries may be exhausted. Check the condition of the batteries and the 0.5A fuse.
Why are no measurements possible via V/mA socket on my ProsKit Multimeter?
If you can't get any measurements via the V/mA socket on your ProsKit Multimeter, the fuse might be defective. Check the 0.5A fuse and replace it if necessary.
What to do if there is no change in measured values on ProsKit Multimeter?
If the measured values on your ProsKit Multimeter aren't changing, ensure that you've selected the correct measuring sockets and that the measuring range/mode (AC/DC) is correct.
Why are no measurements possible via 10A socket on my ProsKit mt-2017 Multimeter?
If you're unable to get any measurements through the 10A socket on your ProsKit Multimeter, the fuse might be defective. Inspect the 10A fuse and replace it if needed.
General| Brand | ProsKit |
|---|---|
| Model | mt-2017 |
| Category | Multimeter |
| Language | English |
Essential steps and precautions to take before performing any measurement with the multimeter.
Procedure for checking the internal battery condition and indicators for replacement.
Detailed steps for measuring DC voltage, emphasizing safety and correct lead connection.
How to perform central zero DC voltage measurements for polarity detection.
Instructions for measuring AC voltage, noting the polarity insignificance and safety.
Guidelines for measuring DC current, including correct jack usage and overload protection.
Steps to measure resistance, including zeroing the meter and selecting the correct range.
Procedure for testing diodes, including forward and reverse current measurements.
How to perform a continuity test using the buzzer function for low resistance checks.
Testing transistor hFE and checking LED functionality using the dedicated socket.
Methods to test the condition of 1.5V and 9V batteries using the BATT ranges.
Steps to measure dB values, requiring a specific capacitor and referencing dB scales.
Procedure for measuring capacitance, including range selection and reading the C scale.
Detailed instructions for replacing 1.5V and 9V batteries, including cover removal.
