15
Press the▲/▼ button to select a spot massage for any part of the back.
Press the button again to stop the spot massage function and to resume the full
back massage function.
Note: The spot massage is not operable when the rolling function is activated
13. Partial
Partial Back Massage
Press this button once to activate the massage rollers. The massage rollers
perform the partial massage with an 8 cm (3.1”) range of movement.
Press the ▲ or ▼ button to select a partial massage for any part of the back.
Press the button again to stop the partial massage function and to resume the full
back massage function
14. ▲/▼
Position Adjustment Button for Spot or Partial Massage
When the spot or partial massage functions are activated these buttons will move
the massage rollers.
Press and hold the ▲ or ▼ button to move the massage rollers up or down.
Release the ▲ or ▼ button when the desired position is achieved.
15. Width
Width Adjustment Buttons for Tapping and Rolling Functions
When the tapping and rolling functions are activated this button will adjust the width
of movement to medium, narrow or wide in the following sequence: M<N<W
16. Intensity
Intensity Adjustment Button for Kneading, Tapping, Dual-Action, Swedish,
Rolling and Auto Program Mode
When the kneading, tapping, dual-action, rolling and auto program functions
are activated this button will adjust the intensity to high, medium or low in the
following sequence:
M<H<L<OFF<M.
To Next Page
Loading...
