To Next PageTo Next PageWhat to do if my Prospera PL009 Massager does not turn on?
If your Prospera Massager isn't turning on, first, ensure the batteries are installed correctly. Remove and reinstall them to be sure. If that doesn't work, the batteries may be dead, so try replacing them with new ones.
Why is the stimulation weak on my Prospera PL009?
Weak or nonexistent stimulation from your Prospera Massager can occur for several reasons. Check the following: * Ensure the electrode heads are in close contact with your skin. Clean them and place them back on the skin. * Make sure the electrode heads aren't touching each other; separate them if they are. * Verify that the wires are properly connected to both the electrode heads and the main device. Disconnect, clean, and reconnect all parts. * Check if the batteries are dead and replace them if needed.
What to do if Prospera PL009 pads are not sticky?
Pads get deteriorative. Contact Prospera for replacements.
Why does my skin feel numb after using the Prospera PL009 Massager?
If your skin feels numb after using the Prospera Massager, it could be due to a couple of reasons. First, the electrode heads might be dirty, so clean them with a damp cloth. Also, ensure the electrode heads are making close contact with your skin; remove them and place them again on the skin.
What to do if Prospera PL009 Massager does not turn on?
If your Prospera Massager doesn't turn on, first ensure the batteries are correctly installed by removing and reinstalling them. If it still fails to power up, replace the batteries, as they may be dead.
Why is the stimulation weak or not existent on my Prospera PL009 Massager?
If you're experiencing weak or nonexistent stimulation with your Prospera Massager, ensure the electrode heads are making good contact with your skin and are not touching each other. Also, verify that the wires are properly connected to both the electrode heads and the main device. Finally, check if the batteries are dead and replace them if needed. Clean the electrode heads, disconnect and reconnect all parts.
Why does skin turn red after using Prospera PL009 Massager?
If your skin turns red after using the Prospera Massager, it might be due to prolonged treatment time. To prevent this, treat another area.
What to do if skin feels numb after using Prospera PL009 Massager?
If your skin feels numb after using the Prospera Massager, it could be because the electrode heads are dirty or not making good contact with your skin. Clean them with a damp cloth and ensure they are properly placed on your skin.
Key safety warnings before using the device, including contraindications and usage restrictions.
Important cautionary notes regarding the device's effectiveness, limitations, and unknown long-term effects.
Potential side effects such as skin irritation, burns, headache, and when to consult a physician.
Guide for installing batteries, connecting wires and electrode pads, and placing pads on skin.
Steps for powering on, selecting programs, adjusting intensity, and choosing modes/speed.
Table listing common device malfunctions, their causes, and recommended solutions.
General
