8
Step 4:
Connect the wire plugs. See PIC 4.
Step 3:
Install the seat pad by connecting the vibration
socket point as demonstrated in PIC 3.
Step 5:
Install the remote controller stand by tightening
the screws as demonstrated in PIC 5.
Step 7: (optional)
Remove the spare pad located in the
backrest cover for a deeper massage.
PIC 5
PIC 6
PIC 3
PIC 4
Step 6:
Attach the backrest pad and the pillow pad as
demonstrated PIC 6.
a) Attached the backrest pad with the zipper.
b) Attached the pillow pad with using the hook and loop fasters.
A B
To Next Page
Loading...
