31
Stick the condensation strip to the underneath of the worktop.
e to attach the condensation strip could
result in damage to your worktop.
Levelling the appliance
e level for it to operate
properly.
o Make sure that the dishwasher is supported whilst it is being
The feet can be adjusted by hand or by using a spanner.
o Use a spirit level to check that the
appliance is level
Check that the appliance is level from
side to side.
o Check that the appliance is level from
front to back.
efore first use
n.
rain or inlet hoses.
o That the inlet and outlet hose are fully tightened.
o That the inlet and outlet hoses are not kinked.
o That the power is switched on.
o That the rinse aid dispenser has been filled.
o Separate the backing paper away from the strip.
o
o IMPORTANT: Failur
o IMPORTANT: Your dishwasher must b
levelled, otherwise it may tip over.
o
o
B
You should check the following before using the appliance for the first
time:-
o That the dishwasher is level and fixed in positio
o That the water tap is fully open.
o That there are no leaks at either end of the d
To Next Page
Loading...