Prostat PRS-812 - Page 25

25
Rev. C / January 2012
PRS-812 Resistance Meter
3. An LED corresponding to the measurement’s order of magnitude will be energized

























Measuring 958Ω in Auto
Ohms Mode
Measuring 958Ω in Auto
Exponenal Mode
F. Measurements from 1.0x10
4
to less than 1.0x10
6
ohms:
1. When the resistance measurement is greater than 1.0x10
4
ohms test voltage will automacally
be increased to 10 volts, and the resistance range will be adjusted as necessary.
2. A stable resistance measurement will be obtained within 2.0 to 4.0 seconds.
3. Once a stable measurement is conrmed and displayed,  will be energized in the LCD and
the electricaon mer will stop.


Ω

-




Electricaon Remains 2.0 – 3.0 sec.
on Measurements <1.0E+06 Ohms