Prostat PRS3110 - User Manual

PRS3110
Single Stage Heat / Cool
Conventional and Heat Pump
1 Specifications
2 Installation
3 Setting User Options
4
Operating Your Thermostat
5 Additional Operation Features
6 Thermostat Maintenance
Warning
Turn off power to the heating or cooling
equipment before installation.
Attention
For installation by experienced service
technicians only.
PRS3210
Up to 2 Heat / 1 Cool
Conventional and Heat Pump
Read all instructions before proceeding.
This thermostat is compatible with:
• Single stage heat / cool conventional and heat pump systems
• Conventional systems up to 2 heat / 1 cool (
PRS3210 only)
• Single compressor heat pump systems with an auxiliary heat stage (PRS3210)
• 250 – 750 millivolt heat only systems
Electrical and control specifications:
• Electrical Rating: 24 Volt AC
• 1 amp maximum load per terminal
• AC Power: 18 – 30 Volts AC
• DC Power: 3.0 Volt DC (2 “AA” Alkaline Batteries Included)
• Control Range: 45° – 90° F (7° – 32° C)
• Temperature Accuracy: +/- 1° F (+/- .5° C)
Terminations
• PRS3110 – Rc, Rh, O, B, Y1, W1, G, C
•
PRS3210 – Rc, Rh, O, B, Y1, E/W1, G, W2, C
1
Specifications
PRS3110-100-02
Non-Programmable Thermostats
User
Manual
Model number is located on back of thermostat
This thermostat requires 24 Volt AC Power or two (2) properly installed
“AA” Alkaline batteries for proper operation. When connecting 24 Volt
AC Power the batteries may be installed as a backup. Thermostat
installation and all components of the system shall conform to
Class II Circuits per NEC code.
For use only as described in this manual. Any other use will void warranty.

Summary

Specifications

Installation

Thermostat Location

Details optimal placement and areas to avoid for thermostat installation.

Install the Sub-Base

Guides on removing and mounting the thermostat sub-base.

Provide Power

Explains connecting 24 Volt AC power or installing batteries.

Connect Your Wires

Provides wiring configurations for conventional and heat pump systems.

Set Installer Switches

Attach Thermostat to Sub-Base

Setting User Options

Advanced User Options

Explains how to access and change user-configurable settings.

Table of User Options

Lists available user options, default values, and setting choices.

Detailed Explanation of User Options

Provides detailed explanation of temperature differential settings.

Prostat PRS3110 Specifications

General

Brand	Prostat
Model	PRS3110
Category	Thermostat
Language	English