Home
Protec
Diagnostic Equipment
PRS 500 F
Protec PRS 500 F User Manual
44 pages
Manual
Specs
Ask a question
To Next Page
To Next Page
Loading...
PROTEC GmbH & Co. KG
In den Dorfwiesen 14, 71720 Oberstenfeld, Germany
Telephone: +49 (0) 7062/92 55-0 E-Mail: protec@protec-med.com
Version: 6.0
Issued: 2022-01-19
Subject to alterations
PRS 500 F
Basic diagnostic X-ray syste
m
Model/ID: 7067-9-8
050_Vxxx
Basis_UDI-DI: 426050264X0
06ZM
Instructions for use
Ident. Nr. 5067-0-8002
PRS 500 F in analogue base
configurat
ion
2
Table of Contents
Table of Contents
3
Revision Status
6
General Notes
7
Mechanical - Electric Warning
7
Radiation Warning
7
Device Description
9
Introduction
9
Description
9
System Components
9
Hardware and Network System Requirements
9
Installation
10
Floor Capacity
10
Performance Characteristics
10
Radiographic Table
10
X-Ray Tube Support Stand
10
Image Receptor Floor Stand
11
Intended Use
11
Clinical Benefit
11
Patient Target Group(S)
11
Medical Conditions to be Diagnosed
11
Indications and Contraindications
12
Indications
12
Contraindications
12
Intended User Group
12
1.10 Declaration of Conformity
12
Safety Instructions
13
General Safety Instructions
15
Requirements for Operation
15
Device Operation
15
Operating Type
15
Operating Personnel
15
Crushing and Collision Hazard
16
Explosion Protection
16
Radiation Protection
16
Ventilation
16
Interaction with Other Devices
16
Electromagnetic Environment and Influencing of Devices
16
Control Elements and Displays
18
Main Switch of the X-Ray System
18
Emergency Stop Switches of the X-Ray System
19
Generator Emergency Stop Switch
19
Control Elements and Display of PROGNOST F
19
Control Elements and Display of PROGNOST SH
19
Prognost Sh
19
Prognost Sh Touch
20
Foot Pedal
21
Control Elements and Display of Collimator
22
Control Elements and Display of X-Ray Tube
22
Control Elements and Display of X-Ray Generator
22
Control Elements of Bucky, Grid Entity
22
Control Elements and Display of Verticalx-Ray System Image Receptor Stand PROVERT
23
Vertical Carriage
23
3.10 Control Elements and Device Displays of RAPIXX System
23
Control Elements and Device Displays of CONAXX 2
23
Handling / Operation
24
Requirements before and During Operation
24
Operation of the X-Ray System
24
Operation at the X-Ray System Table
24
Position of Patients on the Tabletop
24
Setting the X-Ray Unit on the MID Moving Bucky, Grid Entity
24
Inserting a Cassette into the Cassette Tray
24
Adjusting the Focus-Film Distance (FFD)
24
Adjusting the Light Resp. X-Ray Field
24
Exposure Preparation / Exposure Release
24
Overtable Exposures
25
Exposures with the Lateral Detector Holder (Optional)
25
Operation at X-Ray System Image Receptor Stand PROVERT
26
Adjustment of the X-Ray Unit to the MID of a Cassette or Bucky/Grid Entity of Ax-Ray System Image Receptor Stand (Vertical Center Beam)
26
Adjustment of the Source to Image-Receptor Distance (SID)
26
Adjustment of the Light-/ Radiation Field
26
Exposure Preparation/ Release
26
Operation X-Ray System Table PROGNOST F
26
Operation Collimator
26
Operation X-Ray Tube
26
Operation X-Ray Generator
27
Operation Bucky, Grid Entity
27
Operation Verticalx-Ray System Image Receptor Stand PROVERT
27
Operation RAPIXX System
27
4.10 Operation Software
27
4.11 Function of the PRS 500 F
27
4.11.1 Switching the PRS 500 F on and off
27
4.11.2 Dosimetric Calibration
27
4.12 Automatic Exposure Control
27
Safety and Maintenance
28
Introduction
28
Reusability
28
Cleaning and Disinfection
28
Cleaning
28
Disinfection
28
Inspection and Maintenance
29
Daily Monitoring before and During the Examination Operation
29
Regular Monitoring
29
Maintenance
29
Warranty
29
Product Service Life
30
Further Information
30
Applied Parts and Parts Which Get Handled Like an Application Part
30
Disposal
30
Power Supply
31
Electromagnetic Compatibility (EMC) after en 60601-1-2
31
Guidelines and Manufacturer's Declaration - Electromagnetic Interference
32
Technical Data
35
Dimensions
35
X-Ray System Table PROGNOST F
37
Bucky, Grid Entity
37
X-Ray Tube Support Stand
38
Image Receptor Stand
38
Attenuation Equivalent
39
Protection Art and Protection Class
39
Automatic Cut-Off Dose
39
Analogue System
39
Digital System
39
Environmental Conditions
39
Environmental Conditions During Operation
39
Environmental Conditions for Shipping and Storage
39
Description of Symbols, Labels and Abbreviations
40
Symbols
40
Identification Label
41
Labels
42
Position Symbols and Labels
43
Abbreviations
44
Other manuals for Protec PRS 500 F
User Manual
39 pages
Need help?
Do you have a question about the Protec PRS 500 F and is the answer not in the manual?
Ask a question
Protec PRS 500 F Specifications
General
Brand
Protec
Model
PRS 500 F
Category
Diagnostic Equipment
Language
English
Related product manuals
Protec PRS 500 E
47 pages
To Next PageTo Next Page
Need help?
General
