Home
Protec
Diagnostic Equipment
PRS 500 E
Protec PRS 500 E User Manual
47 pages
Manual
Specs
Ask a question
To Next Page
To Next Page
Loading...
PROTEC GmbH & Co. KG
In den Dorfwiesen 14, 71720 Oberstenfeld, Germany
Telephone: +49 (0) 7062/92 55-0 E-Mail: protec@protec-med.com
Version: 6.0
Issued: 2022-01-19
Subject to alterations
PRS 500 E
Basic diagnostic X-ray syste
m
Model/ID: 7069-9-8
050_Vxxx
Basis UDI-DI: 4260502
64X005ZK
Instructions for use
Ident. Nr. 5069-0-8002
2
Table of Contents
Table of Contents
3
Revision Status
6
General Notes
7
Mechanical - Electric Warning
7
Radiation Warning
7
To the User
8
Device Description
9
Introduction
9
Description
9
System Components
9
Hardware and Network System Requirements
9
Installation
10
Floor Capacity
10
Performance Characteristics
10
Height-Adjustable X-Ray System Table
10
X-Ray Tube Support Stand
11
Image Receptor Floor Stand
11
Intended Use
11
Clinical Benefit
11
Patient Target Group(S)
11
Medical Conditions to be Diagnosed
11
Indication and Contraindication
12
Indications
12
Contraindications
12
Intended User Group
12
1.10 Declaration of Conformity
12
Safety Instructions
13
General Safety Instructions
15
Requirements for Operation
15
Device Operation
15
Operating Type
15
Operating Personnel
15
Crushing and Collision Hazard
16
Explosion Protection
16
Radiation Protection
16
Ventilation
16
Interaction with Other Devices
16
Electromagnetic Environment and the Influence of Devices
17
Control Elements and Displays
18
Main Switch of the X-Ray System
18
Emergency Stop Switches of the X-Ray System
19
X-Ray System Table Emergency Stop Switch
19
Generator Emergency Stop Switch
19
Control Elements and Display of PROGNOST E
19
Control Elements and Display of PROGNOST SH
19
Prognost Sh
19
Prognost Sh Touch
20
Foot Pedal
21
Control Elements and Display of Collimator
22
Control Elements and Display of X-Ray Tube
23
Control Elements and Display of X-Ray Generator
23
Control Elements of Bucky, Grid Entity
23
Control Elements and Device Displays of Vertical X-Ray System Image Receptor Stand PROVERT
24
Vertical Carriage
24
3.10 Control Elements and Device Displays of RAPIXX System
24
Control Elements and Device Displays of CONAXX 2
24
Handling / Operation
25
Requirements before and During Operation
25
Operation with the Radiographic System
25
Operation at the X-Ray System Table
25
Position of Patients on the Tabletop
25
Setting the X-Ray Unit on the MID Moving Bucky, Grid Entity
25
Inserting a Cassette into the Cassette Tray
25
Adjusting the Focus-Film Distance (FFD)
25
Adjusting the Light Resp. X-Ray Field
25
Exposure Preparation / Exposure Release
26
Overtable Exposures
26
Exposures with the Lateral Detector Holder (Optional)
26
Operation at Vertical X-Ray System Image Receptor Stand PROVERT
27
Adjustment of the X-Ray Unit to the MID of a Cassette or Bucky/Grid Entity of a X-Ray System Image Receptor Stand (Vertical Center Beam)
27
Adjustment of the Source to Image-Receptor Distance (SID)
27
Adjustment of the Light-/ Radiation Field
27
Exposure Preparation/ Release
27
Operation of the X-Ray System Table PROGNOST E
27
Operation of the Collimator
27
Operation of the X-Ray Tube
28
Operation of the X-Ray Generator
28
Operation of the Bucky, Grid Entity
28
Operation of the Vertical X-Ray System Image Receptor Stand PROVERT
28
Operation of the RAPIXX System
28
4.10 Operation of the Software
28
4.11 Function of the PRS 500 E
28
4.11.1 Switching the PRS 500 E on and off
28
4.11.2 Dosimetric Calibration
28
4.12 Automatic Exposure Control
29
Safety and Maintenance
30
Introduction
30
Reusability
30
Cleaning and Disinfection
30
Cleaning
30
Disinfection
30
Inspection and Maintenance
31
Daily Monitoring before and During the Examination Operation
31
Regular Monitoring
31
Maintenance
31
Warranty
31
Product Service Life
32
Further Information
32
Applied Parts and Parts Which Get Handled Like an Application Part
32
Disposal
32
Power Supply
33
Electromagnetic Compatibility (EMC) after en 60601-1-2
33
Guidelines and Manufacturer's Declaration - Electromagnetic Interference
34
Technical Data
37
Dimensions
37
X-Ray System Table PROGNOST E
39
Bucky, Grid Entity
39
X-Ray Tube Column
40
Vertical X-Ray System Image Receptor Stand
40
Attenuation Equivalent
41
Protection Art and Protection Class
41
Automatic Cut-Off Dose
41
Analogue System
41
Digital System
41
Environmental Conditions
41
Environmental Conditions During Operation
41
Environmental Conditions for Shipping and Storage
41
Description of Symbols, Labels and Abbreviations
42
Symbols
42
Identification Label
44
Labels
44
Position Symbols and Labels
46
Abbreviations
47
Other manuals for Protec PRS 500 E
Instrcutions For Use
41 pages
User Manual
39 pages
Need help?
Do you have a question about the Protec PRS 500 E and is the answer not in the manual?
Ask a question
Protec PRS 500 E Specifications
General
Brand
Protec
Model
PRS 500 E
Category
Diagnostic Equipment
Language
English
Related product manuals
Protec PRS 500 F
44 pages
To Next PageTo Next Page
Need help?
General
