Protec PRS 500 E - Position Symbols and Labels

47 pages

Save Page as PDF

To Next Page

To Previous Page

PRS 500 E

Instructions for use

5069-0-8002

PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 46 von 47

8.4 Position symbols and labels

Identification

label

Identification

label

Identification label

At both ends

of the rail

Main Page

Table of Contents3
Revision Status6
General Notes7
Mechanical - Electric Warning7
Radiation Warning7
To the User8
Device Description9
Introduction9
Description9
System Components9
Hardware and Network System Requirements9
Installation10
Floor Capacity10
Performance Characteristics10
Height-Adjustable X-Ray System Table10
X-Ray Tube Support Stand11
Image Receptor Floor Stand11
Intended Use11
Clinical Benefit11
Patient Target Group(S)11
Medical Conditions to be Diagnosed11
Indication and Contraindication12
Indications12
Contraindications12
Intended User Group12
1.10 Declaration of Conformity12
Safety Instructions13
General Safety Instructions15
Requirements for Operation15
Device Operation15
Operating Type15
Operating Personnel15
Crushing and Collision Hazard16
Explosion Protection16
Radiation Protection16
Ventilation16
Interaction with Other Devices16
Electromagnetic Environment and the Influence of Devices17
Control Elements and Displays18
Main Switch of the X-Ray System18
Emergency Stop Switches of the X-Ray System19
X-Ray System Table Emergency Stop Switch19
Generator Emergency Stop Switch19
Control Elements and Display of PROGNOST E19
Control Elements and Display of PROGNOST SH19
Prognost Sh19
Prognost Sh Touch20
Foot Pedal21
Control Elements and Display of Collimator22
Control Elements and Display of X-Ray Tube23
Control Elements and Display of X-Ray Generator23
Control Elements of Bucky, Grid Entity23
Control Elements and Device Displays of Vertical X-Ray System Image Receptor Stand PROVERT24
Vertical Carriage24
3.10 Control Elements and Device Displays of RAPIXX System24
Control Elements and Device Displays of CONAXX 224
Handling / Operation25
Requirements before and During Operation25
Operation with the Radiographic System25
Operation at the X-Ray System Table25
Position of Patients on the Tabletop25
Setting the X-Ray Unit on the MID Moving Bucky, Grid Entity25
Inserting a Cassette into the Cassette Tray25
Adjusting the Focus-Film Distance (FFD)25
Adjusting the Light Resp. X-Ray Field25
Exposure Preparation / Exposure Release26
Overtable Exposures26
Exposures with the Lateral Detector Holder (Optional)26
Operation at Vertical X-Ray System Image Receptor Stand PROVERT27
Adjustment of the X-Ray Unit to the MID of a Cassette or Bucky/Grid Entity of a X-Ray System Image Receptor Stand (Vertical Center Beam)27
Adjustment of the Source to Image-Receptor Distance (SID)27
Adjustment of the Light-/ Radiation Field27
Exposure Preparation/ Release27
Operation of the X-Ray System Table PROGNOST E27
Operation of the Collimator27
Operation of the X-Ray Tube28
Operation of the X-Ray Generator28
Operation of the Bucky, Grid Entity28
Operation of the Vertical X-Ray System Image Receptor Stand PROVERT28
Operation of the RAPIXX System28
4.10 Operation of the Software28
4.11 Function of the PRS 500 E28
4.11.1 Switching the PRS 500 E on and off28
4.11.2 Dosimetric Calibration28
4.12 Automatic Exposure Control29
Safety and Maintenance30
Introduction30
Reusability30
Cleaning and Disinfection30
Cleaning30
Disinfection30
Inspection and Maintenance31
Daily Monitoring before and During the Examination Operation31
Regular Monitoring31
Maintenance31
Warranty31
Product Service Life32
Further Information32
Applied Parts and Parts Which Get Handled Like an Application Part32
Disposal32
Power Supply33
Electromagnetic Compatibility (EMC) after en 60601-1-233
Guidelines and Manufacturer's Declaration - Electromagnetic Interference34
Technical Data37
Dimensions37
X-Ray System Table PROGNOST E39
Bucky, Grid Entity39
X-Ray Tube Column40
Vertical X-Ray System Image Receptor Stand40
Attenuation Equivalent41
Protection Art and Protection Class41
Automatic Cut-Off Dose41
Analogue System41
Digital System41
Environmental Conditions41
Environmental Conditions During Operation41
Environmental Conditions for Shipping and Storage41
Description of Symbols, Labels and Abbreviations42
Symbols42
Identification Label44
Labels44
Position Symbols and Labels46
Abbreviations47

Protec PRS 500 E - Position Symbols and Labels

Table of Contents

Other manuals for Protec PRS 500 E

Related product manuals