Protec PRS 500 E - Identification Label; Labels

PRS 500 E Instructions for use
5069-0-8002
PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 44 von 47
Horizontal movement of the X-ray system tube support, floor
stand and vertical movement of the X-ray tube assembly
8.2 Identification label
Exemplary for PRS 500 E with X-ray generator 50 kW
8.3 Labels
Labels on the side of the tabletop
Carbon tabletop
Composite-fibre tabletop 200cm
Composite-fibre tabletop 226cm
Labels on top of the tabletop
Maximum allowable Patient weight (distributed load) for the
tabletop
(Composite-fibre tabletop).
Maximum allowable Patient weight (distributed load) for the
tabletop
(Carbon tabletop).
Labels on top of the tabletop and/or tube arm
Caution: Possible pinch-/crushing hazard fort he hands and
fingers while moving the tabletop, table and or X-ray tube
assembly unit.