PRS 500 E
Instructions for use
5069-0-8002
PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 17 von 47
2.1.9 Electromagnetic Environment and the influence of devices
CAUTION!
The use of other accessories, other converters and other cables than those
specified by PROTEC or provided in the documentation of the component
manufacturer can result in increased electromagnetic interference or reduced
electromagnetic immunity of the device and lead to defective operation.
CAUTION!
The use of the PRS 500 E immediately next to other devices or with other
devices in a stacked form should be avoided, as this could result in defective
operation. If use in the manner described above is nevertheless necessary, the
PRS 500 E and the other devices should be observed to ensure that they are
working properly.
NOTE
The properties of this device, determined by emissions, allow its use in industrial
areas and in hospitals (CISPR 11, class A). When used in residential areas (for which
class B is usually required by CISPR 11), this device may not provide adequate
protection for radio services. The user may need to take remedial measures such as
relocating or realigning the device.
The PRS 500 E is intended for use in an environment in professional health care facilities (e.g. clinics,
surgery centres, physiology practices ...).
To Next Page
Loading...
