Protec PRS 500 E - Product Service Life; Further Information; Applied Parts and Parts Which Get Handled Like an Application Part; Disposal

PRS 500 E Instructions for use
5069-0-8002
PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 32 von 47
Warranty work may only be carried out by trained specialists.
5.4.5 Product Service Life
The PRS 500 E is designed for a service life of 10 years when used in accordance with the specifications
and regular maintenance by PROTEC service department or a service company authorized by them.
After the product has reached the end of its service life, further use is at your own risk.
5.4.6 Further Information
Detailed information to the individual chapters and for a safe operation, transport or storage can be
found in the Technical Description of the system and of the individual components.
5.4.7 Applied Parts and parts which get handled like an application part
Part
Definition
Applied part or part that is treated like an applied part but is not
defined as an applied part.
Table top Applied part
Cover vertical X-ray
system image receptor
stand
Applied part
Detector
Applied part
Housing parts PROGNOST
E
Part, get handled like an application part
Optional accessory
Patient extending handle
( optional ; mounted at
the vertical X-ray system
image receptor stand)
Part, get handled like an application part
Patient handle ( optional ;
mounted at the X-ray
system table)
Part, get handled like an application part
Compression Band
(optional)
Part, get handled like an application part
Mattress (optional)
Part, get handled like an application part
5.4.8 Disposal
The PRS 500 E contains various plastics, oil and heavy metal. When disposing
exchange and spare parts, or if necessary, the entire device, the valid rules and
regulations must be observed. Please contact your contractual partner or
service company or commission a company specialized in disposing the
respective components.