protech YADA ST - Clutch Building; Clutch Set Up and Engine Mount

22
Building the clutch / Montage van de koppeling
Montage du système d’embrayage / Montierung von die kupplungsglocket
Clutch Set Up
Cap Screw 3 x 12mm
T30.197
Cap Screw 3 x 12mm
T30.197
Exhaust Gasket
(Is included with the engine)
(*) Engine Mount
T30.085
Corn Collar
(Is included with the engine)
Fly Wheel
T30.122
Center Screw
T30.123
* Clutch Spring
Clutch Bell 13T
T30.120
Ball Bearing
T30.145
Clutch Shoe 3 Piece
T30.127
Ball Bearing
T30.145
Cap Screw 3 x 10mm
T30.196
Engine Mount
Engine Mount Screw 4 x 8mm
T30.128
NUT LOCK
NUT LOCK
Cap 3mm x 12mm (x4)
Cap 3mm x 10mm (x1)
R/H 4mm x 8mm (x4)
Engine Mount YADA ST 6061 = T30.085
Engine Mount YADA PRO = T31.214
Engine Mount YADA PRO-X = T31.234
*
M3 Washer
T30.142
SX-21 Factory Engine
M1042
Clutch Spring 0.9mm = T30.124
Clutch Spring 1.0mm = T30.125
Clutch Spring 1.1mm = T30.126
*
This gap can adjusted by add one or
more shims
Ajoutez une ou plusieurs rondelles
pour limiter le jeu
Deze spatie kan opgevuld worden met
één of meer rondellen
Die Spatzierung kann aufgefult
werden mit ein oder mehrdere
Unterlegscheiben