
Do you have a question about the protech YADA ST and is the answer not in the manual?
Information on after-sales service for manufacturing faults.
Details on after-sales service in Dutch.
Information on customer service in German.
After-sales service details in French.
Key features and specifications for the YADA ST model.
Additional features for the YADA PRO model.
Enhanced features for the YADA PRO-X model.
List of essential tools for building and maintaining the model.
Instructions for setting up and breaking in the engine.
Instructions for assembling front and rear differentials.
Steps for assembling rear and central gear differentials.
Guide for assembling the rear gearbox and center differential.
Instructions for assembling the front gearbox and suspension parts.
Steps for mounting front sway bar and upper suspension plate.
Detailed assembly of front upper suspension parts.
Assembly of steering knuckles and the front steering system.
Instructions for assembling the servo saver and its shaft.
Steps for assembling rear suspension components.
Instructions for rear hub carriers and drive set assembly.
Guide for assembling the center gearbox and differential mount.
Instructions for mounting differentials and gear cases onto the chassis.
Steps for installing tension rods and steering rods on the chassis.
Guide for assembling the steering servo and radio plate.
Instructions for installing the receiver box and radio plate set.
Steps for assembling the fuel tank and fuel guard.
Instructions for clutch setup and engine mount installation.
Steps for assembling the muffler and throttle control linkage.
Guide for assembling front and rear shock absorbers.
Instructions for setting up shock oil levels and procedures.
Detailed steps for mounting the front and rear shock absorbers.
Instructions for mounting the rear wing and its stays.
Guide for linkage adjustment and air filter installation.
Instructions for assembling tires and connecting the fuel line.
Guide for cutting and preparing the model's body.
Details on engine carburetor parts and assembly.
Information on optional parts for the engine.
Important safety guidelines for operating the model.
Guide on proper jumping techniques and handling.
Setup guide for track conditions and suspension.
Setup details for shocks, differentials, and clutch.
Guide for engine, tyres, and recording race results.