protech YADA ST User Manual

10


Assembly of the front suspension / Montage van de voorste ophanging /
Montage de la suspension avant / Montierung von die vordere Querlenker
Make sure that the swaybare can move freely
Distance between the 2 ball Ends = 0.5mm
Front Upper Sus. Plate ( * )
MAKE 4 SETS !
Stabilizer Ball
T30.100
Ball End 6mm
T30.051
3 x 12mm
T30.188
Ball 6mm
T30.102
3 x 3mm
T30.186
NUT LOCK
3 x 3mm
T30.186
NUT LOCK
R/H 3 x 16mm
T30.213
R/H 3 x 16mm
T30.213
3 x 5mm
F/H 3 x 8mm
T30.204
Sway Bar Plate (*)
T30.104
* Sway Bar Front
Not Included in YADA ST
Front Upper Sus. Hinge Pin Holder-R
T30.043
Front Upper Sus. Hinge
Pin Holder-L
T30.043
Front Sway Bar
Front Upper Suspension Plate
R/H 3 x 8mm
T30.210
R/H 3mm x 8mm (x4)
3mm x 3mm (x2)
3mm x 5mm (x2)
R/H 3mm x 16mm (x2)
F/H 3mm x 8mm (x2)
YADA ST = 6061 Alu Front Upper Sus. Plate T30.080
YADA PRO = 7075 Black anodized CNC plate T31.208
YADA PRO-X = 7075 Black/chrome anodized CNC plate-X T31.209
Nylon Nut M3
T30.172
YADA PRO = 7075 Sway Bar Plate T31.217
YADA PRO-X = 7075 Sway Bar Plate T31.235
Front Sway Bar 2.2mm : T30.105
2.3mm : T30.106
2.4mm : T30.107
Stud lock
A601
Nut lock
A600
*
*
*

protech YADA ST Specifications

General

Brand	protech
Model	YADA ST
Category	Toy
Language	English