- 10 - © 2019 https://www.ProTechTrader.com
General Specifications
Accuracy: LCD 3 ½ digits (2000 count)
LCD Size: 1.1in high
Polarity: Automatic – Negative indicated by “-“
Sampling speed: 2 times per second
Over-load indication: “1” is displayed
Operating Environment: 0°C~40°C, at <80%RH
Storage Environment: -10°C~50°C, at <85%RH
Power: 9V NEDA 1604 or 6F22 Battery
Low battery indication: “ ”
Static electricity: Approximately 4mA
Product Size: 129 x 70 x 29mm
Product net weight: 129g (including battery)
Battery and Fuse Replacement
Fuse will rarely need replacement. Blown fuses
are likely a result of operator error.
If “ ” appears on the display, it indicates that the
battery should be replaced.
To replace battery & Fuse (500mA/250V) remove
the 2 screws on the rear bottom of the case,
simply remove the old, and replace with a new one.
Be careful to observe the proper polarity.
Package Contents
➢ Digital Multimeter
➢ User Guide
➢ Set of test leads
➢ 9-volt battery (6F22) factory installed
To Previous Page
Loading...