Need help?Do you have a question about the Proteco LEADER 5 and is the answer not in the manual?
General| Maximum Gate Weight | 500 kg |
|---|---|
| Operating Temperature | -20°C to +55°C |
| Protection Class | IP44 |
| Power Consumption | 300 W |
| Manual Release | Yes, with key |
| Motor Voltage | 230V AC |
| Safety Features | Obstacle detection |
Essential safety precautions for operating and installing the gearmotor.
Manufacturer declares product compliance with relevant EEC directives and standards for safety.
Overview of the LEADER operator range for residential swing gates and its intended purpose.
Detailed technical specifications for LEADER TI and LEADER TA models, including power, thrust, and dimensions.
Lists the components included in the LEADER TI and LEADER TA installation kits.
Provides dimensional drawings and measurements for LEADER TI and LEADER TA models.
Essential checks to perform before installing the gearmotor for gate automation.
Instructions and diagrams for wiring the LEADER gearmotor for standard installation.
Guidance on identifying and mounting the correct Right Hand (RH) and Left Hand (LH) operator.
Guidelines for positioning the gearmotor vertically based on gate sturdiness.
Recommendations for horizontal placement of the gearmotor relative to the gate post.
Specific considerations for automating gates that open outwards.
Instructions for welding or bolting the rear bracket T1 to the post for motor attachment.
Steps to determine the position and fix the front bracket S3 to the gate leaf for LEADER TI.
Steps to determine the position and fix the front bracket S4 to the gate leaf for LEADER TA.
Instructions for manually releasing the gearmotor for LH and RH operators.
Guidelines for functional checks and lubrication of the gearmotor every six months.
Instructions on how to safely dismantle and dispose of the gearmotor components.
To Next Page
