Mounting and positioning
Remember to heat the system before testing
Reduce the risk of sabotage by placing the Fog Cannon™
as high as possible
Min. installation distance from objects – 2.5 m
Check the control signals before testing
The fog machine must be placed to ensure immediate
coverage of possible access points
Minimum safety distance is 35 cm for people and objects.
Do not look directly into the nozzle at a short distance
- risk of scalding!
Check the uid level after testing (hand over the fog
machine with a full uid container)
For horizontal mounting, place the Fog Cannon™ as shown
in the picture
To ensure the best possible coverage the fog needs free
passage
Avoid covering escape routes with security fog
Min. 10 cm
Min. 10 cm
PROTECT 800i C
TM
10-15
PROTECT 1500i C
TM
15-25
Min.
To Next Page
Loading...
