PROTECTGLOBAL.COM PROTECTGLOBAL.COM
This quick guide does not replace the installation manual and
the recommended technical training course for installers.
DIP switch 10 should be set to ON to let the acoustic alarm activate in case of a fault.
REMEMBER to set the fog time on DIP switch 2, 3 and 4.
Tables for fog time and DIP switch settings, together with QR codes for the installation
manual, are displayed in this quick guide.
About avoiding accidental ring
The IEC 62642-8 norm for security fog prescribes a method to avoid accidental ring of fog -
e.g.during service. However, the diagram in this quick guide does not include this step as the
method used is dierent from alarm installer to alarm installer.
Contact us on our website for more information about technical training courses.
Also, try our free technical e-learning – more information on protectglobal.com/e-learning
To Next Page
Loading...
