Protek 608 - Page 28

28
Al'l'ENDICES
3 AC+DCmV&V
- -
•
no .... '
-
..... 1 .....
•••
. ... . ...
I.S %+5Od for <300mV
2.5%
3.5%
4.5%
AC+OCmV
SOO.OOmV
2.0% for > 300mV for >50mV for >50 mV for >50mV
S.OOOOV
3.5 %
2.S%
for
SO.OOOV
for AC + DC V Level
AC+DCV
Not
AC+OC V
2.0 %+ 5Od
500.00 V
,,10%
of
>
10 % of
Specified
Full Scale
Full Sca le
7SO.0V
IIilmI
Input impedance, crest factors and protection aTe the same as those descrived in
ACmV&ACV.
4 DC current
, .....
-.
-
n 0 IE
I
DCuA 100 ohm
5000.0 uA
INIJJJV Fast Fuse &
0.2%+Sd
'i2V M.O.Varistor
DCmA
1 ohm
SOO.OO mA
DCA
10Mohm 10.000 A O.5 %+Sd
15NIJJJV Fast Fuse
IIilmI
1) Burden vo lt age : Test cuTTent x (Shunt R + Fuse R)
2) The "A" input terminal allows continuous cuTTent flow up to SA ; within 3
minutes up to lOA or within 30 seconds up to ISA. Successive high CUTTent
measurements above SA requires 10minutes of cooling time between measure-
ments.
5 AC current
-
, ,
n nil'
I
ACuA
5OOO . 0uA
10.7S %+20d
INIJJJV Fa st Fuse &
ACmA
500.00 mA
SOHz to 1kHz for < 4OOOOcount
'i2V M.O. Varistor
ACA 10.000 A
1 % for :> 40000count
15 NIJJJV Fast Fuse
IIilmI
1) Burden voltage: Same as in DC CUTTent
2) True RMS crest factor: Same as in AC V
3) Frequency response up to 20kHz , the same as ACmV.