Proteus STUDIO-7 - User Manual

Need help?

Do you have a question about the Proteus STUDIO-7 and is the answer not in the manual?

Summary

Assembly Step 1: Base Assembly

Step 1-1: Attaching Vertical Post

Securing the vertical post to the main base using bolts, washers, and lock nuts.

Assembly Step 2: Weight Plates Installation

Step 3: Weight Plate Selection Rod

Inserting the weight plate selection rod into plates and securing with pin.

Step 4: Top Beam Attachment

Attaching the top beam to the vertical post using bolts and washers.

Assembly Step 5: Press Connect Frames

Step 5-1: Press Shaft Bar Assembly

Assembling the press shaft bar through connect frames and main base with bushings and locknuts.

Step 6: Adjustable Press Frame

Attaching handle foam, end plugs, and adjustable press frame to the bench press arm.

Assembly Step 7: Seat Cushion Support

Step 8: Back Cushion Assembly

Assembly Step 9: Foot Frame and Seat Support

Step 9-1: Leg Extension Bushing

Step 10: Arm Curl and Leg Extension

Assembly Step 11: Butterfly Extension

Step 11-1: Butterfly Arm Alignment

Step 12: Solid Handle Attachment

Assembly Step 14: Upper Cable Routing

Step 15: Top Beam Pulleys

Step 16: Vertical Post Pulleys

Step 17: Lat Bar and Double Strap

Step 18: Single Pulley Brackets

Step 19: Butterfly Cable Attachment

Assembly Step 20: Bracket Piece Pulleys

Step 21: Bench Press Arm Pulleys

Step 22: Vertical Post and Leg Extension Pulleys

Step 23: Lower Cable Routing

Assembly Step 24: Cover Attachment

Proteus STUDIO-7 Specifications

General

Brand	Proteus
Model	STUDIO-7
Category	Home Gym
Language	English