other controls may result in damage and will often require extension work by a qualified
technician to restore the product to normal operation.
e.
If the product has been dropped or the cabinet has been damaged.
f.
If the product exhibits a distinct change in performance,indicating a need for service.
B. SPECIFICATIONS
1.
Maximum Resolution
1280 x 1024 @ 75Hz
2.
Recommend Resolution
1280 x 1024 @ 60Hz
3.
Synchronization Range
Horizontal
Vertical
30 – 81 KHz
56– 75 Hz
4.
Active Display Area
337mm (H) x 270mm (V)
5.
Dot Pitch
0.264(H) x 0.264(V) mm
6.
Support display colors
16.7M color
7.
Contrast Ratio (Typical)
400
8.
Luminance of White
250cd/m²
9.
Bandwidth
135MHz
10.
User Control
4 Key Switch
11.
OSD Function
Brightness, Conrast, H-Pos, V-Pos, H. Size, Phase, Color Select,
Auto, Reset, Language, OSD Adjust, Exit
12.
View Angle
Horizontal
Vertical
60 , 60 Degrees
40 , 60 Degrees
13.
Power Source
100 – 240 Vac 60 / 50 Hz
14.
Power Consumption
48W (max.)
15.
Connection Type
15 Pin D Type
16.
Input Signal
Video
Sync.
Analog R.G.B. , 0.7Vp-p / 75 Ohms
TTL level,positive or negative polarity
17.
Color Temperature
Cool / Warm
18.
Dimension (WxHxD)
480mm x 435mm x 180mm
19.
Monitor Weight
4.2Kg
20.
Base Operation
Tilt
0 / + 15 degree
21.
Power Saving
ON
STAND BY
OFF
＜
48W
＜
5W
＜
5W
22.
Signal Connector Pin Assignment
Pin No.
1. Red 9. 5V
DC
2. Green 10. Sync. Ground
3. Blue 11. Ground
4. Ground 12. SDA (For DDC)
5. Self Test 13. Horizontal Sync.
6. Red Ground 14. Vertical Sync.
7. Green Ground 15. SCL (For DDC)
8. Blue Ground
23.
Audio signal
3.5Φ stereo phone jack
Input Sensitivity : 200mV
2+2W 8Ω Speaker
To Next Page
Loading...