3. Motion Detection
When motion detection is on, the camera will automatically record any
movement detected in front of the camera. This feature must be turned off
during regular driving/recording. The primary purpose of motion detection is
video surveillance. When parking your car, power the camera via any USB
power source, and let the camera record any movement in front of it.
4. Battery Charging
The internal battery will automatically charge while a power source is
connected (Whether the camera is on or off). When it’s charging, this icon
will flash. Once the internal battery is fully charged, this icon will be
displayed on the main screen.
10
5. USB mode
When connecting this Road Camera to a PC, it functions as a Mass Storage.
- USB Flash Drive
Allows you to access and download all recorded video files, like a regular
memory stick.
6. Reset
If the camera crashes or recordings become abnormal during use, you can
press the RESET button to reset the camera's operating system.
To Next Page
Loading...
