EasyManua.ls Logo

Prowise ProLine+ - Network Connectivity; Connect Prowise Central to Network; Connect to WiFi Network; Connect PC Module to Network

Prowise ProLine+
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
● You will now find the icon of Prowise Reflect in the status bar (at the top of your screen). Press this icon
to start Prowise Reflect.
● You can now connect your personal device to the touchscreen.
How do I connect to a network?
When connecting to a network, it is important to connect both Prowise Central as the PC module to a network to
ensure both channels can be used to its full potential.
Connecting Prowise Central to a network
● Connect the network cable to the LAN port (2) of the touchscreen.
● Place 5 fingers on the touchscreen for at least two seconds to launch the Prowise Central menu.
● Go to the settings menu in the sidebar.
● Choose the sub menu ‘Connectivity’.
● Choose ‘Ethernet’.
● Activate the toggle.
● Prowise Central is now connected to a wired network.
● Connect LAN Cable
Connect to a WiFi network:
● Place 5 fingers on the touchscreen for at least two seconds to launch the Prowise Central menu.
● Go to the settings menu in the sidebar.
● Choose the submenu ‘Connectivity’.
● Choose ‘WiFi’ and the touchscreen will search for available WiFi networks.
● Select the desired network.
● Enter the password for the network, click the eye to display the entered password.
● Click “Connect”.
● You are now connected to a WiFi network.

Connecting the PC module to a network
Connect to a wired network:
● Connect the network cable to the LAN port of the PC module (upper module at the right side of the
screen).
● In the Windows environment of the PC module, in the menu bar, you can see whether you are
connected to a wired network.
www.prowise.com
6 / 7