following on your phone: Go to Settings > Bluetooth > tap on your device name (PRD_XXXX) to force it
to reconnect.
Replaced battery and now the PRD won't work
Most likely the PRD was not completely snapped back together. If the outer case is not fully snapped
back into place and secured, the PRD speaker will not work, or it will work intermittently. Look at the
PRD from the side to see which corners have not been fully snapped into place.
Note that when replacing the battery, the PRD will still be paired to your phone, but the PRD's default
settings will be restored. Be sure to dispose of the old battery based on your local recycling
regulations.
© 2022 Prox Devices, Inc. All rights reserved. 4
To Next Page
Loading...