Proxim ORiNOCO AP-800-US User Manual

Basic Configuration
ORiNOCO
®
802.11n Access Points - Software Management Guide 24
Ensure to COMMIT the configured changes and REBOOT the device.
4.2 Factory Default Configuration
SSID Default SSID set on both the radios, is as tabulated below:
For details on how to change SSID, refer to Virtual Access Point (VAP)
Security By default, the security is set to None. For details, refer to Wireless Security
Parameter Default Values
User Name admin
Password public
System Name System-Name
Network Mode Bridge
IP Address Assignment Type Dynamic
Fall Back IP Address 169.254.128.132
Subnet Mask 255.255.0.0
Gateway IP Address 169.254.128.133
Link Integrity Status Disabled
STP Status Disabled
Radio Mode Radio1: AP
Radio2: AP
Radio Status Enabled
Country Code NoCountry (World Regulatory Domain)
US (US Regulatory Domain)
JP (JP Regulatory Domain)
UnitedKingdom (EU Regulatory Domain)
Device Type SSID
Radio 1 Radio 2
AP-800 My Wireless Network 1_1 Not Applicable
AP-8000 My Wireless Network 1_1 My Wireless Network 2_1
AP-8100 My Wireless Network 1_1 My Wireless Network 2_1

Proxim ORiNOCO AP-800-US Specifications

General

Brand	Proxim
Model	ORiNOCO AP-800-US
Category	Wireless Access Point
Language	English