To Next PageTo Next Page
Need help?Do you have a question about the Proxim Tsunami 800 series and is the answer not in the manual?
General| Brand | Proxim |
|---|---|
| Model | Tsunami 800 series |
| Category | Wireless Access Point |
| Language | English |
Provides an overview of the manual's content and purpose.
Lists the Tsunami® 800 and 8000 series products that this guide covers.
Identifies the intended reader for this installation guide.
Outlines the required knowledge for the reader to use this guide effectively.
Lists other documentation available for Proxim products.
Explains icons and formatting used in the manual.
Details the Tsunami® 800 and 8000 series product lines.
Explains the MIMO antenna technology used in Proxim devices.
Hardware overview and installation for specific 800 series models.
Hardware overview and installation for 800 series CPE models.
Hardware overview and installation for the MP-826-CPE-50 device.
Hardware overview and installation for specific 8000 series models.
Hardware overview and installation for MP-8160 series devices.
Hardware overview and installation for MP-8150-CPE and QB-8150-LNK devices.
Hardware overview and installation for the MP-8160-CPE-A100.
Hardware overview and installation for MP-8150-SUR-100 and QB-8150-LNK-100.
Lists the various Tsunami® 800 and 8000 series device models.
Details the accessories included with the product shipments.
Specifies the Orthogonal Frequency Division Multiplexing modulation rates.
Describes the wireless communication protocols supported by the devices.
Details the various input and output interfaces on the devices.
Provides information on configuring transmit power levels.
Specifies the receive sensitivity parameters for the devices.
Lists the materials required for weatherproofing connections.
Provides detailed instructions for weatherproofing device connectors.
