CONNECTIONPACKING LIST
STAND ASSEMBLY
INPUT VOLTAGE
Connect the power cord for your monitor to the port on the back of the
monitor. Plug the power cord for the monitor into a nearby outlet. Use a connec-
tion appropriate for your computer. Using the or connector on the video
card. Connect the signal cable to the or port of your computer.
If any of these items are missing, please contact with your
dealer for technical support and customer service.
100-240V~, 50/60Hz, 1.1A
Please consult label on back of monitor.
English
1. Carefully remove the monitor, stand connector and stand base from the box.
2. Attach the stand base to the stand connector using the M6 screw provided.
4. Lift monitor up straight and remove the bottom foam. Stand the monitor up on the
installed base.
WARNING: The panel of the monitor is fragile. Keep the foam underneath the monitor screen while assembling the stand.
Monitor size: 34”
Resolution: 3440 x 1440 / 21 : 9
Refresh rate: 144 Hz
Response time: 1 ms
Colors: 16.7 Millions
Max Brightness: 350 cd / m²
Height & tilt adjustable stand
To Next Page
Loading...
Need help?
General
