Dimensions:
Length: 8
1
/2
’’ with chuck (220 mm)
Weight: 1.1 lb (500 g)
Chuck capacity:
1
/64 ’’–
1
/8 ’’ (0,5–3,2 mm)
Spindle collar:
3
/4 ’’ (20 mm)
Motor:
Rotational speed 5,000–20,000 rpm
Voltage ~ 115 V, 60 Hz
- 6 -
Symbols
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
Symbol Name Designation/Explanation
V Volts Voltage (potential)
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
kg Kilograms Weight
min Minutes Time
s Seconds Time
Ø Diameter Size of drill bits, grinding wheels, etc.
n
0
No load speed Rotational speed, at no load
…/min Revolutions or reciprocation per minute Revolutions, strokes, surface speed, orbits etc. per minute
1, 2, 3, … Selector settings Speed, torque or position settings. Higher number means
greater speed
Infinitely variable selector Speed is increasing from narrow end
➞ Arrow Action in the direction of arrow
Alternating current Type or a characteristic of current
Class II construction Designates Double Insulated Construction tools.
To Next Page
Loading...
