Need help?Do you have a question about the Proxxon MF 70 and is the answer not in the manual?
Technical specifications of the milling machine, including voltage, power, speed, and dimensions.
Information regarding noise and vibration emission levels, including measurement conditions and potential variations.
Instructions for assembling the compound-type table and securing the milling machine to a work surface.
Procedures for installing collet chucks and adjusting spindle speed for optimal performance.
Guidelines for safe milling, workpiece fastening, feed rate, and adjusting table scales and guide play.
General| Product type | Bench drill press |
|---|---|
| Idle oscillation rate (max) | 5000 OPM |
| Idle oscillation rate (min) | 20000 OPM |
| Input power | 100 W |
| Power source | AC |
| AC input voltage | 230 V |
| AC input frequency | 50 - 60 Hz |
| Product color | Green |
| Multi-tool applications | Drilling |
| Manual | Yes |
Weight and Dimensions| Height | 370 mm |
|---|---|
| Weight | 7000 g |
To Next Page