- 9-
Note:
E
very device is dirtied by dust when working. Cleaning is
therefore essential. To ensure a long service life, however,
the machine should be cleaned with a soft cloth or brush
a
fter each use.
M
ild soap or other suitable cleaning agent may be used in
this context. Solvents or cleaning agents containing alcohol
(e.g. petrol, cleaning alcohols, etc.) should be avoided, since
t
hese can attack plastic casings.
T
he apertures required for cooling the motor must always be
kept free of dust and dirt.
Accessories
F
or more detailed information on accessories, please
request our device catalogue from the address specified on
the last page in the warranty information.
Please note in general:
Proxxon bits and cutters have been designed to work with
our machines, which makes them optimal for their use.
We will not assume any liability whatsoever for the safe and
proper function of our devices when using third-party bits and
cutters!
Service note
Please note: The mains power input may only be replaced by
our Proxxon Service Department or a qualified specialist!
Disposal
Please do not dispose of the device in domestic waste! The
device contains valuable substances that can be recycled. If
you have any questions about this, please contact your local
waste management enterprise or other corresponding
municipal facilities.
EC Declaration of Conformity
Name and address: PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation: MF 70
Article No.: 27110
I
n sole responsibility, we declare that this product con-
f
orms to the following directives and normative docu-
m
ents:
EU EMC Directive 2014/30/EC
DIN EN 55014-1 / 09.2016
DIN EN 55014-2 / 01.2016
DIN EN 61000-3-2 / 03.2015
DIN EN 61000-3-3 / 03.2014
EU Machinery Directive 2006/42/EC
DIN EN 62841-1 / 07.2016
Date: 10.05.2017
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is identical with the
signatory.
To Next Page
Loading...
