Need help?Do you have a question about the Proxxon FF 230 and is the answer not in the manual?
General| Brand | Proxxon |
|---|---|
| Model | FF 230 |
| Category | Power Tool |
| Language | English |
Customer welcome and introduction to the PF 230 and KT 230.
Details the PF 230 milling machine and KT 230 compound-type table, listing their parts.
Specifies voltage, power, speeds, dimensions, and weight for the PF 230.
Provides work area, travel, weight, and feed details for the KT 230.
Emphasizes critical safety measures for operation, including PPE and material handling.
Details standardized measuring methods for noise and vibration emissions.
Guides on mounting the milling machine on a lathe and on the KT 230 compound-type table.
Explains how to adjust the milling spindle height using fine tolerance feed.
Details basic drilling and setting a limit stop for precise depth control.
Instructions for fitting and using the spindle fine feed accessory (item no. 24140).
Explains how to rotate the milling spindle along vertical and horizontal axes.
Step-by-step guide for correctly installing collet chucks into the spindle.
Important note on adjusting spindle speeds via V-belt before making adjustments.
Provides safety advice and steps for performing milling operations with the machine.
Covers belt replacement, lubrication, and adjusting table guide/spindle play.
Instructions for cleaning the machine after use and proper disposal methods.
To Next Page
