Proxxon MIS 1 User Manual

ProxxonTools.com
Manual
MIS 1
- 2 -
Your device does not work properly? Please read the operating
instructions again carefully. If the unit is in fact defective, please
send it to:
PROX-Tech, Inc.
2555 Tate Blvd SE
PO Box 1909
Hickory, NC 28603-1909
We will respond in a prompt and reliable manner. You can also
order any necessary spare parts from this address.
Important: A short description of the fault helps us to respond
even more quickly. When returning a device within the warranty
period, please enclose the relevant purchase receipt.
Made in Germany by PROXXON GmbH, D-54518 Niersbach,
Im Spanischen 18-24
Notes

Proxxon MIS 1 Specifications

General

Brand	Proxxon
Model	MIS 1
Category	Power Screwdriver
Language	English

Summary

Manual

Foreword

General Safety Rules

Work Area

Keep work area clean and well lit to prevent accidents and distractions.

Electrical Safety

Guidelines for safe electrical operation, grounding, and cord use.

Personal Safety

Advice on staying alert, proper attire, and avoiding hazards.

Tool Use and Care

Safe Tool Handling

Ensure safe operation through proper handling, footing, and protective gear.

Specific Safety Rules for Rotary Tools

Operating Precautions

Detailed safety guidelines for operating rotary tools, including bit usage and adjustments.

Description of the Machine

Legend

Identifies and labels parts of the tool based on Fig. 1.

Functional Description

Key Features

Details the tool's equipped features like drill chuck, gear, and clutch.

Technical Data

Recommended Accessories

Operation

Clamping and Changing Tools

Instructions for securely inserting and changing tools in the drill chuck.

Adjusting Torque

Procedure for setting the desired torque value using the adjustment ring.

Connecting the Machine

Guidance on connecting the tool to the PROXXON power pack.

Working with the Machine

Important safety and operational notes when using the tool.

Care and Maintenance

After Use Cleaning

Steps for cleaning the tool after operation and removing dust.

Repair and Servicing

Guidelines for tool maintenance, part replacement, and authorized repair.