-15-
But as stated: Recommendations aredifficult,
the correct speed depends on the material, con-
tact pressureand friction and grain size of the
grinding wheels.
7Careand maintenance
Caution:
Beforecleaning, adjusting, service or repair,dis-
connect the mains plug!
Note:
The machine is largely maintenance free. To
ensurealong service life, however,the machine
should be cleaned with asoft cloth, handbrush
or paintbrush after each time it is used. Avac-
uum cleaner is also recommended here. Avac-
uum cleaner should always be used during
work!
The outside of the housing can be cleaned with
asoft, possibly damp cloth. In this process, mild
soap or another suitable cleaning agent can be
used. Solvents or cleaning agents containing
alcohol (e.g. petrol, cleaning alcohols etc.)
should be avoided, since these can attack the
plastic cases.
8Disposal
Please do not dispose of this machine in house-
hold refuse! The machine contains materials
that can be recycled. If you have any questions
about his, please contact your local recycling
company or other relevant communal facilities.
9ECDeclaration of Conformity
Name and address:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation: TG 125/E
Article No.: 27060
In sole responsibility,wedeclarethat this
product conforms to the following directives
and normative documents:
EU EMC Directive 2014/30/EC
DIN EN 55014-1/05.2012
DIN EN 55014-2/02.2016
DIN EN 61000-3-2/03.2015
DIN EN 61000-3-3/03.2014
EU Machinery Directive 2006/42/EC
DIN EN 62841-1/07.2016
DIN EN 62841-3-4/12.2016
Date: 07.12.2016
Dipl.-Ing. JörgWagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is identical
with the signatory.
To Next Page
Loading...
