Proxxon TSG 250/E User Manual

M
d
"Servicio técnico y gestión de repuestos"
e
t
  
         
        
         
   
        
    
      
 
з
TSG 250/E
MANUAL

Proxxon TSG 250/E Specifications

General

Input power	230 W
Power source	AC
Product color	Black, Green, Yellow
Type of sander	Disc sander
Adjustable speed	Yes
Housing material	Aluminum

Weight and Dimensions

Depth	230 mm
Width	280 mm
Height	330 mm
Weight	7000 g
Sanding disc diameter	250 mm

Summary

Introduction

Description of Disc Sander TSG 250/E

Scope of Delivery

Legend (Fig. 1)

Technical Data

Commissioning the Device

Setting up your disc sander

Instructions for placing the device on a level surface and securing it.

Removing and attaching the sanding table

Procedure for detaching and reattaching the sanding table for specific tasks.

Check and set angle display

Steps to verify and adjust the angle display calibration for accuracy.

Setting the sanding table angle

How to adjust the sanding table to a specific angle for chamfering.

Connecting the Vacuum Cleaner

Working with the Disc Sander TSG 250/E

Notes on sanding speed

Guidance on selecting appropriate sanding speeds for different materials and tasks.

Working with the angle stop (Fig. 8)

Instructions for using the angle stop for precise angled sanding operations.

Adhering or replacing the sanding discs (Fig. 9)

Procedure for attaching and replacing the sanding discs using the silicone film.

Accessories

Care and Maintenance

Disposal

CE Declaration of Conformity